The Urban Farm Market
153pcs/set Micro Spray Irrigation Device Micro Drip Watering Kits
153pcs/set Micro Spray Irrigation Device Micro Drip Watering Kits
Couldn't load pickup availability
SPECIFICATIONS
Plant Watering Kit: DIY Drip Irrigation System
Micro Spray Irrigation Device: Automatic Drip Watering Kits
Garden Hose Micro Drip Watering Kits: Mist Nozzles Irrigation Kit
Garden Plants Watering System: Garden Dripper Sprinkler Kit
Type: Watering Kits
Model Number: Drip Irrigation System Kits
Name: Micro Spray Irrigation Kit
Material: PP
Size: About 30m/1181.1inch
Package list: 10 x Drippers, 3 x Nozzles, 10 x Double Barbs, 10 x Label
Model Number: Drip Irrigation System Kits
Type: Watering Kits
Material: plastic
Hign-concerned Chemical: None
Choice: yes
semi_Choice: yes
|
153pcs/set DIY Drip Irrigation System Water-saving 30m Garden Hose Micro Drip Watering Kits Gardening Tools Irrigation Equipment Feature: 1. Micro Spray Watering: The fine atomizing nozzle liquid forms a centrifugal vortex in the guide vane, and sprays fine hollow mist particles from the nozzle hole, which can be widely used in humidification, cooling, disinfection, dust reduction, landscaping of factories , salt spray test and other artificial fog. 2. Durable & Cost Saving: The nozzle holes of this type of nozzle are drilled by American precision punching machine, which is well-made, and the cost of use is more than 10 times lower than that of air humidification. 3. Energy & Water Saving: This series of nozzles does not need air assistance, the system installation is simple, the mist spray point is fine, the atomization is sufficient, energy saving and water saving, low cost, and good effect. 4. Easy to Use: This nozzle can fully use the pressure of tap water for atomization. 5. Scope of Application: Agriculture, lawn, villas, industrial irrigation, green belt irrigation, dehumidification is the first choice. Easy to install, good water saving performance! Specification: Type: Watering Kits Model Number: Drip Irrigation System Kits Name: Micro Spray Irrigation Kit Material: PP Size: About 30m/1181.1inch Package list: 10 x Drippers, 3 x Nozzles, 10 x Double Barbs, 10 x Label Plates, 3 x 15cm Ground Plug Rods, 10 x 16L Drippers, 10 x Nozzles, 10 x Tee, 15 x Small Ground Plugs, 10 x Flat Mouth Tees, 10 x Stoppers, 2 x Connectors, 1 x Universal Connector, 1 x Water Divider, 1 x Quick Connect, 1 x PTFE Tape, 45 x Rolled Strip Installation steps: 1. It is recommended to install the mist system at a height of 2.5m-3m. 2. Connect the adapter to the faucet. 3. Turn on the tap to wash the system for 1 minute to clean the system and remove impurities. 4. Screw the spray nozzles onto the tee fittings, except for the very end nozzle. 5. Turn on the tap to rinse the system for 2 minutes to ensure the system is fully cleaned. 6. Turn off the water and install the last nozzle onto the fitting with an end plug. 7. Secure the atomizing tube with the supplied cable tie saddle clip. 8. Turn on the tap until the sprayer works and enjoy the cooling misting system. 9. When the atomizing system is not used for a long time, close the nozzle and keep it dry and clean. Note: 1 x Watering Kits
.
|
